logo
Products
Backplane connector
European socket
Internet Connector
RJ45
Product Center

2.0mm Pin header/SMT/2 row/2 plastic/H1.0/H1.5/H2.0/H2.5/H3.0

Basic parameters
Item No
13XX22XXXNXXMXXXX0X
Type Pin Header Connector
Order of Units

each row 02~40Pin

Interval2.0mm
Rated Current2.0A
Rated voltage250V AC/DC
Installation Method

SMT

产品认证资料





Overview
Engineering Data
Product Certification
Engineering Drawing
Download

Pin Header

This type of connector is widely used in PCB circuit boards in electronics, appliances, and instruments. Its function is to serve as a bridge between blocked or isolated circuits within the circuit, responsible for the task of current or signal transmission. Usually used in conjunction with the busbar to form a board to board connection, or in conjunction with electronic wiring harness terminals to form a board to line connection. It can also be independently connected with a dry board to board. Due to the different specifications required by different products, there are various models and specifications of the busbar connectors. According to the standard classification of busbar connectors in the electronics industry, they can be roughly divided into five types: 2.54mm, 2,00mm, 1.27mm, 1.00mm, 0.8mm. There are single and double busbar connectors according to the number of rows, Three rows, etc.

Underlying parameter

Item No13XX22XXXNXXMXXXX0X
TypePin Header
Order of Unitseach row 02~40Pin
Interval2.0mm
Typemale
Installation MethodSMT



Engineering parameters

Rated Current2.0A/250VAMP
Contact Resistance20mΩ Max
Withstand Voltage500AC / DC
Insulation Resistance1000mΩ Min
Operating Temperature-40 to 105° C
Contact MaterialPhosphor Bronze
Contact Plating

Copper alloy


Insulator MaterialPA6T
HousingPPS
Max. Processing Temp.

260℃ for ±5  -5 seconds;






工程图

13XX22XXXNXXMXXXX0X

Format:PDF

Date: