1.27x2.54mm Ejector Header Connector/SMT
| Item No | 3340XXMXXXBLX0X |
| Type | Ejector Header Connector |
| Order of units | 10-100Pin |
| Interval | 1.27x2.54mm |
| Rated current | 1.0A |
| Rated voltage | 250V AC/DC |
| Installation method | Chip Type |
Ejector Header Connector
Horn connectors can be divided into 1.27-pitch, 2.0-pitch and 2.54-pitch horn connectors according to the pin spacing, and can also be divided into straight-pin, curved-pin and patch horn connectors according to the welding mode of pins. The name of the horn connector mainly comes from the fact that its interface is provided with double horn buckles, which are used to firmly fix IDC cable interface on the horn connector (this is also the main difference between the horn connector and the Jane cow connector). The function of the horn connector in PCBA is to connect IDC cables with corresponding specifications and connect them with other circuit modules to form the circuit functions that designers need to achieve. Generally speaking, its main purpose is to transmit control signals and weak current for PCBA board.
基础参数
| Item No | 3340XXMXXXBLX0X |
| Type | Ejector Header Connector |
| Order of units | 10-100Pin |
| Interval | 1.27x2.54mm |
| Cztegory | Male |
| Installation method | Chip Type |
基础参数2
| Rated Current | 1.0A |
| Withstand Voltage | 250V AC/DC |
| Pressure Proof | 500V AC 60秒 |
| Contact Resistance | Max20mΩ |
| Insulation Resistance | Min1000MΩ |
| Operating Temperature | -40℃ ~ +105℃ |
| Contact Plating | Copper Alloy |
| Housing | PA6T |
| Max. Processing Temp. | 260℃±5℃ 10秒 |
